| |
|
SINGLE PHASE
ELECTRONIC VOLTAGE STABILISERS
"IMP1" RANGE
|
|
|
|
|
|
|
|
|
|
POWER |
INPUT |
OUTPUT |
FREQUENCY |
SPEED |
ACCURACY |
FROM
3KVA TO 30KVA |
230V -25% +15% |
230V |
50/60
Hz |
2
mSEC/V |
±
2% |
Impact serial STATIC VOLTAGE REGLATOR is a high
technologic solution for operation of your sensitive devices without any
problem wherever the main supply is not trusted . Produced of high
quality semi-conductor materials, at the capacity to operate with high
efficiency under terms of high and fast change of voltage and at full
load.
IMPACT SERIAL STATIC VOLTAGE REGULATOR, controls via microprocessor
cards and regulates via thyristors. There is not any moving part in
IMPACT. Thus, it has extremely high speed response (500 VAC/sec.) than
Servoregulators. Easy usage with its compact design, maintanence free
and long life facilities. |
|
Rated
power |
from 3kVA to 30kVA |
Power
factor |
0.9 |
Input
voltage |
230V |
Input
voltage range |
from 172V to 264V
(-25% : +15%) |
Output
voltage |
230V |
Output
voltage accuracy |
± 2% |
Frequency |
50Hz
±5% (60Hz optional) |
Regulation
speed |
500 Volt/sec |
Acceptable
overload |
101%:125% 3 min. - 126%:150% 10" -
>151% shutdown within 0.2" |
Load
acceptable variation |
from 0 to 100% |
Power
factor acceptable variation |
0 - 1 |
Full
load efficiency |
> 97% |
Harmonic
distortion |
< 0,5% |
Ambient
temperature |
-10° : +40°C |
Relative
humidity |
up to 90% (without condensation) |
Altitude |
up to 2000m. above sea level
without derating |
Noise
level |
< 50 dB |
Low/High
voltage protection |
output voltage out of range 180V:230V shutdown through contactor |
Current
protection |
Electronic protection from overlod through microprocesssor
Input automatic circuit breaker |
Display |
LCD Display
4x16 characters with visualisation:
input voltage, output voltage, load %, output frequency, regulator state
and error info, overload, overtemperature, input fault |
By-pass |
manual
bypass for maintenance and protection from fault |
Standard
fittings |
Epoxy painted enclosure, automatic
circuit breaker, LCD display, input/output terminal blocks on rear side,
by-pass switch |
power |
part no. |
output current |
dimensions
mm. (incl.protection of terminals) |
weight |
VA |
A |
B |
C |
kg. |
3000 |
IMP103 |
12 A |
200 |
380 |
380 |
30 |
5000 |
IMP105 |
19 A |
260 |
380 |
450 |
40 |
7500 |
IMP107 |
29 A |
260 |
380 |
450 |
45 |
10000 |
IMP110 |
38 A |
260 |
380 |
450 |
50 |
15000 |
IMP115 |
58 A |
300 |
480 |
510 |
70 |
20000 |
IMP120 |
78 A |
300 |
480 |
510 |
90 |
25000 |
IMP125 |
97 A |
300 |
480 |
510 |
100 |
30000 |
IMP130 |
117 A |
300 |
480 |
510 |
130 |
|
|
1. Upper and side cover
2. Front panel/cover mounting screws
3. LCD Display
4. Front panel
5. Front cooling slots
6. Side cooling slots |
7. Lifting handles
8. Cooling fan
9. By-pass switch
10. Input automatic circuit breaker (output breaker optional)
11. Terminals protection
12. In/out terminal blocks
13. Regulator legs |
|