| |
|
THREE PHASE AUTOMATIC VOLTAGE STABILISERS
"RTC220" RANGE (INPUT LINE WITHOUT NEUTRAL)
|
|
|
|
POWER |
INPUT |
OUTPUT |
FREQUENCY |
SPEED |
ACCURACY |
from
6 to 30KVA |
220V three phase ± 15%
|
220V three phase
|
50/60
Hz
|
20
mSEC/V |
±
1% |
"RTC/220"
automatic three phase voltage stabilisers with electronic control and
INDEPENDENT VOLTAGE REGULATION ON EACH PHASE are essential for the use
with any unbalanced loads. The stabilisers use three control circuits
and three servo-motors; each phase is individually regulated, making the
voltage rigorously constant near the rated value. The "RTC/220"
stabilisers are ideal for any application and vary silent, totally free
from magnetic leakage and do not introduce harmonic distortion. Neutral
wire is not necessary for a proper operation: this stabiliser has been
designed to work with 220V, three wires lines. "RTC/220" staiblisers are equipped
with an automatic 3-poles circuit breaker, digital voltmeter with input
and output voltage reading on each phase, fine voltage regulation on
each phase. |
|
|
|
Power |
from 6kVA to 30kVA |
Input voltage |
220V three phase L-L |
Input acceptable
voltage variation |
± 15% (from 187V to
254V three phase L-L) |
Output voltage |
220V three phase L-L |
Output voltage accuracy |
± 1% with independent
regulation |
Output fine voltage
regulation |
± 5% separately on
each phase |
Frequency |
50/60Hz |
Regulation speed |
20/1000 sec. / Volt |
Output load possible
variation |
da 0 a 100% |
Tolerable load
unbalance |
0 - 100% |
Acceptable load power
factor |
0 - 1 |
Full load efficiency |
> 98% |
Harmonic distortion |
< 0,5% |
Ambient temperature |
0° : 45°C |
Altitude |
to 1000m. above
sea level without derating |
Applied standards |
IEC
60686 |
Cooling |
6 : 15kVA Air natural
22 : 30kVA Forced cooling (fans) |
Protections |
4-poles automatic
circuit breaker
RFI filter protection on control circuit
Spike protection on control circuit |
Standard
fittings |
Automatic circuit
breaker, digital voltmeter with in/out voltage
reading on each phase,
fine output regulation knob ±5% on each phase
pilot lamp, in/out
terminals |
|
|
power |
part
no. |
dimensions
mm. |
DWG |
weight |
kVA |
A |
B |
C |
kg. |
6 |
RTC22006K |
600 |
300 |
900 |
A |
90 |
9 |
RTC22009K |
600 |
300 |
900 |
A |
95 |
12 |
RTC22012K |
600 |
300 |
900 |
A |
100 |
15 |
RTC22015K |
600 |
300 |
900 |
A |
120 |
22 |
RTC22022K |
600 |
400 |
1700 |
B |
145 |
30 |
RTC22030K |
600 |
400 |
1700 |
B |
170 |
|
|
|
|
|
|
|
|
|
A |
B |
ON REQUEST
WE SUPPLY RTC STABILISERS WITH DIFFERENT RATED VOLTAGE AND
FREQUENCY: 380V,400,
415V,440V AND OTHERS ON
REQUEST
|
|