RENOVA AUDIO – LINE CONDITIONERS FOR HI-FI PROFESSIONAL SYSTEMS, single phase from 1.5KVA to 3KVA
RENOVA AUDIO:
“The definitive network conditioners for the perfect power supply of my hi-end system”
“Specifically made for use in power supply of professional-grade audio systems, we feel the difference”
An advanced voltage regulation system with a wide input range (± 20%) is combined with a shielded copper isolation transformer and a pair of RFI-EMI suppression filters (excludable) that allow you to use a perfect voltage at any output entry condition.
The isolation transformer works as an excellent noise suppressor, limits over-voltages and protects the load from atmospheric discharges.
the new buck-boost and isolation transformer, both toroidal, guarantee perfect dynamics, very low losses, no minimum vibration.
The system is free of cooling fans and extremely silent.
On the front there is a digital instrument with voltage, output current, instantaneous power and energy meter reading, the diverter for reading the input / output voltage, a practical adjustment trimmer that allows you to vary the stabilized output voltage within ± 5% of the rated voltage, the mains power LED, the automatic protection switch
On the back the protected input and output power connection terminals, the output sockets if required.
Enjoy true sound quality with K-factor power systems.
| Rated power | from 1,5kVA to 2.5kVA |
| Input voltage | 230V a.c. |
| Input acceptable voltage range | ± 20% (from 184V to 276V) |
| Output voltage | 230V a.c. |
| Output voltage accuracy | ± 1% |
| Frequency | 50/60Hz |
| Regulation speed | 20/1000 sec. / Volt |
| Load tolerable variation | from 0 to 100% |
| Power factor acceptable range | 0 – 1 |
| Full load efficiency | > 98% |
| Harmonic distortion | < 0,5% |
| Ambient temperature | 0° : 45°C |
| Altitude | up to 1000m. s.l.m. without derating |
| Applied standard | IEC 60686 |
| Protections | Input automatic circuit breaker; input isolation transformer; RIF-EMI filters on input and output side; RFI filter and surge suppressor for electronic card protection; |
| Standard fittings | Automatic circuit breaker; in/out voltage reading digital V-meter; mains led; input/output terminals; output adjustment potentiometer |
| Available options | automatic or manual by-pass; out of range led signal; remote contact for protection state; digital A-meter |
| Colour | Full black |
| Enclosure type | 19″ Rack 5U |
| potwer | part no. | dimensions mm. | weight | ||
| VA | A | B (B) | C | kg. | |
| 1500 | RENOVA.15 | 485 | 420 (460) | 220 | 28.0 |
| 2500 | RENOVA.25 | 485 | 420 (460) | 220 | 30.0 |
