BT – INDUSTRIAL UNINTERRUPTIBLE POWER SUPPLY (UPS) UNITS ON-LINE DOUBLE CONVERSION

Richiedi informazioni

Nome e Cognome (richiesto) *
Azienda (richiesto) *
La tua email (richiesto) *
Telefono (consigliato)
La tua richiesta
Privacy Policy *
Dichiaro di avere letto l'informativa sulla privacy e di autorizzare il trattamento dei dati personali. I dati saranno utilizzati esclusivamente per le finalità indicate, mantenuti riservati e in nessun caso saranno comunicati a terzi.

Download

MODEL BT……		200	250	300	400	500	600	800	1000
Power (kVA/kW)		200	250	300	400	500	600	800	1000

INPUT
Nominal voltage		380/400/415Vac (3ph+N+PE)
Voltage range		138-305Vac at 40% load; 305-485Vac at 100% load
Frequency range		40:70Hz
Power factor		≥ 0.99
Harmonic distortion (THDi)		≤ 3% (100% linear load)
Bypass voltage range		Max. voltage: 220V: ＋25% (Optional ＋10%, ＋15%, ＋20%) 230V: ＋20% (Optional ＋10%, ＋15%) 240V: ＋15% (Optional ＋10%) Min. voltage: －45% (Optional －10%, －15%, －20%, －30%)
Bypass frequency range		Frequency protection range: ±10%
Generator Input		Supported
OUTPUT
Nominal voltage		380/400/415Vac (3ph+N+PE)
Power factor		1.0
Voltage Regulation		± 1%
Frequency	Line mode	Synchronizes with input, when input frequency ＞±10%（±1%/±2%/±4%/±5% optional), output 50/60 (±0.1Hz)
	Bat. mode	(50/60±0.1%) Hz
Crest factor		3:1
Harmonic distortion (THDv)		≤1% with linear load; ≤3% with non-linear load
Efficiency		Up to 96%
BATTERIES
Operating voltage		±180/192/204/216/228/240/252/264/276/288/300Vdc (30/32/34/36/38/40/42/44/46/48/50pcs, 36pcs default, 36~50pcs output power factor 1.0, 32~34pcs output power factor 0.9, 30pcs output power factor
Charge current (A, max)		80	100	100	140	180	200	280	340
SYSTEM CHARACTERISTICS
Transfer time		Mains-Battery: 0ms; Mains-Bypass: 0ms
Overload	Inverter mod.	≤110% 60min, ≤125% 10min, ≤150% 1min, ＞150% 1.2s shuts down the inverter
	Bypass mod.	30℃: 135% for long term; 40℃: 125% for long term; >1000%, 100ms
Overheating		Mains Mode: Switches to Bypass; Battery Mode: Shuts down the UPS immediately
Low battery voltage		Alarm and shutdown
Self-diagnosis		At power-on and via software control
Backfeed protection		Supported
EPO (Optional)		Shuts down the UPS immediately
Batteries		Battery Management
Noise suppression		Compliant with EN62040-3
Audible and visual alarms		Mains Fault, Low Battery, Overload, System Fault
LED & LCD Display		Mains Mode, Bypass Mode, Low Battery, Battery Fault, Overload and UPS fault
LCD display reading		Input, Output, Battery, Command, Setting, Maintenance
Communication interface		RS232, RS485, Parallel, LBS, Dry contacts, Relay Card (Optional), SNMP Card (Optional), Battery temperature sensor (Optional)
ENVIRONMENT
Operating temperature		0℃～40℃
Storage temperature		-25℃～55℃
Humidity Range		0～95% (Non-condensing)
Noise (dB)		< 65	< 65	< 68	< 68	< 70	< 70	< 73	< 75
PHYSICAL CHARACTERISTICS
DIMENSIONS WXDXH mm		600x850x2000				1200x850x2000		2000x850x2000
Net weight kg		360	400	480	530	800	890	1450	1600
STANDARDS
Safety		IEC/EN 62040-1, IEC/EN 62477-1
EMC		IEC/EN 62040-2 (IEC 61000-2-2, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, IEC 61000-4-11)

CategoryUNINTERRUPTIBLE POWER SUPPLIESTHREE-PHASE STATIC UNINTERRUPTIBLE POWER SUPPLIES

The new BT three-phase range joins the current lineups with specific INDUSTRIAL characteristics. Power range in stand-alone systems from 200kVA to 1000kVA. Parallel capability up to 8 units. The main features that distinguish it are technical and structural robustness and latest-generation 3-level technology. This range is recommended for those who have power supply problems with micro-interruptions, mains failures, and grid instability, with a correction of ±20%. In high-power installations, where the main production grid or high-power electrical lines are supplied, from 200kVA to 1MW, equipment failures and production downtime can be avoided, resulting in significant savings that can be classified as Industry 4.0.

Main features:

• Cos-phi 1.0
• Input harmonic distortion ≤ 3%
• System efficiency up to 96%
• Dual power input
• Parallel up to 8 units
• Charging capacity from 80 A to 340 A
• Ability to power inductive and capacitive loads with 100% imbalance
• Standard interfaces: RS232 and 485 Modbus
• Backfeed present

HTML

BT MODEL……		200	250	300	400	500	600	800	1000
Power (kVA/kW)		200	250	300	400	500	600	800	1000
INPUT
Nominal voltage		380/400/415Vac (3ph+N+PE)
Voltage range		138-305Vac at 40% load; 305-485Vac at 100% load
Frequency range		40:70Hz
Power factor		≥ 0.99
Harmonic distortion (THDi)		≤ 3% (100% linear load)
Bypass voltage range		Max. voltage: 220V: ＋25% (Optional ＋10%, ＋15%, ＋20%) 230V: ＋20% (Optional ＋10%, ＋15%) 240V: ＋15% (Optional ＋10%) Min. voltage: －45% (Optional －10%, －15%, －20%, －30%)
Bypass frequency range		Frequency protection range: ±10%
Generator Input		Supported
OUTPUT
Nominal voltage		380/400/415Vac (3ph+N+PE)
Power factor		1.0
Voltage regulation		± 1%
Frequency	Line mode	Synchronizes with input, when input frequency ＞±10%（±1%/±2%/±4%/±5% optional), output 50/60 (±0.1Hz)
	Bat. mode	(50/60±0.1%) Hz
Crest factor		3:1
Harmonic distortion (THDv)		≤1% with linear load; ≤3% with non-linear load
Efficiency		Up to 96%
BATTERIES
Operating voltage		±180/192/204/216/228/240/252/264/276/288/300Vdc (30/32/34/36/38/40/42/44/46/48/50pcs, 36pcs default, 36~50pcs output power factor 1.0, 32~34pcs output power factor 0.9, 30pcs output power factor 0.8)
Charging current (A, max)		80	100	100	140	180	200	280	340
SYSTEM FEATURES
Transfer time		Mains-Battery: 0ms; Mains-Bypass: 0ms
Overload	Inverter mode	≤110% 60min, ≤125% 10min, ≤150% 1min, ＞150% 1.2s shuts down the inverter
	Bypass mode	30℃: 135% for long term; 40℃: 125% for long term; >1000%, 100ms
Overheating		Mains Mode: Transfers to Bypass; Battery Mode: Shuts down UPS immediately
Low battery voltage		Alarm and shutdown
Self-diagnosis		At startup and software control
Backfeed protection		Supported
EPO (Optional)		Shuts down the UPS immediately
Batteries		Battery Management
Noise suppression		Compliant with EN62040-3
Acoustic and visual alarms		Mains Failure, Low Battery, Overload, System Failure
LED & LCD Display		Mains Mode, Bypass Mode, Low Battery, Battery Fault, Overload and UPS Fault
LCD display readout		Input, Output, Battery, Command, Setting, Maintenance
Communication interface		RS232, RS485, Parallel, LBS, Dry contacts, Relay card (Optional), SNMP card (Optional), Battery temperature sensor (Optional)
ENVIRONMENT
Operating temperature		0℃～40℃
Storage temperature		-25℃～55℃
Humidity range		0～95% (Non-condensing)
Noise (dB)		< 65	< 65	< 68	< 68	< 70	< 70	< 73	< 75
PHYSICAL CHARACTERISTICS
DIMENSIONS WXDXH mm		600x850x2000				1200x850x2000		2000x850x2000
Net weight kg		360	400	480	530	800	890	1450	1600
STANDARDS
Safety		IEC/EN 62040-1, IEC/EN 62477-1
EMC		IEC/EN 62040-2 (IEC 61000-2-2, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, IEC 61000-4-11)

BT – INDUSTRIAL UNINTERRUPTIBLE POWER SUPPLY (UPS) UNITS ON-LINE DOUBLE CONVERSION

Prodotti correlati

PLA-SB – THREE-PHASE UPS, DOUBLE CONVERSION FOR SWITCHBOARD IP54, 10 TO 60KVA

NRG-MED – MEDICAL UPS with ON-LINE technology safety and security of medical devices

ERT1 – 19″ RACK UPS ONLINE DOUBLE CONVERSION, SINE WAVE, 1 TO 10KVA