MSN – ONLINE DOUBLE CONVERSION SINE WAVE UPS 1-10KVA
MSN – ONLINE DOUBLE CONVERSION SINE WAVE UPS 1-10KVA
On-line double conversion with Digital Signal Processor (DSP) digital control technology.
Among the main features that make this series of high efficiency there are:
- High input and output PF
- Wide Input Tolerance Range (Energy Savings)
- Eco Mode (Economic operation mode)
- Flexibility and possibility of parallel
- Power Backup Protection and Surge Protection
- Monitoring and Self-diagnosis at every turn-on
- Cold Start (Cold Start)
- By-pass output
- Possibility of autonomous expansion with additional battery boxes
- USB port
- Contact EPO
- Included software
- Intelligent SNMP Network Card Slot
The MSN series is produced with an LCD display from which you can view the operating parameters (more than 50 entries), and where you can set the base configurations.
The UPS MSN, thanks to its compact size, meets the demand for power in small spaces and is suitable for any type of installation. It is a system with double conversion technology online and is available from 1 kVA to 10 kVA with single phase voltages. It is equipped with integrated maintenance bypass (6Kva and 10Kva), with the ability to increase the autonomy available with additional battery packs. It is available in the standard version without transformer and on request it is possible to add it to an external cabinet.
MSN is the ideal product to protect critical loads that require continuous, high-quality power supply with zero-battery transfer times and provide a fault-tolerant electrical protection network.
The 0.9 power factor combined with Digital Signal Processor (DSP) technology delivers high output power and efficiency to all protected loads.
Total power protection – High dynamics of voltage fluctuation without battery power withdrawal.
Monitoring of operation.
Cold start function.
Low / Exhausted Battery Check.
Multiple Level Alarm Stages
All models come with a USB connector for communication and computer dialogue with USB signals (UPS status, batteries, automatic ignition, automatic rescue, etc.).
Internet connection and protection.
| MODEL | MSN01 | MSN02 | MSN03 | ||||
| RATED CAPACITY | 1000VA / 900W | 2000VA / 1800W | 3000VA / 2700W | ||||
| INPUT | Input | Single phase and earthing | |||||
| Voltage range | 115±5VAC-295±5VAC | ||||||
| Frequency range | 45Hz-55Hz@50HZ/55Hz-65Hz@60HZ | ||||||
| Power factor | ≥0.98 | ||||||
| ECO range | Setting output voltage±20VAC | ||||||
| Bypass range | 186VAC-252VAC | ||||||
| THDi | ≤7%(100% non linear load) | ||||||
| Connection | 1x IEC | 1x Terminal L/N + T | |||||
| OUTPUT | Output style | Single phase and earthing | |||||
| Rated voltage | 208/220/230/240VAC | ||||||
| Power factor | 0.9 | ||||||
| Voltage accuracy | ±2% | ||||||
| Output
Frequency |
Line mode | 1. When input frequency is in the range，the output frequency is the same as that of input.
When input frequency is out of the range，the output frequency is (50/60±0.2)Hz when turn to battery mode |
|||||
| Battery mode | (50/60±0.2)Hz | ||||||
| Crest factor | 3:1 | ||||||
| Transfer time | Mains ←→ Battery = 0ms | ||||||
| Overload capacity | Battery mode | 108%±5%<load≤150%±5% ＞30s cut off output and warn,
150%±5%<load<200%±5% ＞ 300ms cut off output and warn |
|||||
| Line mode | 108%±5%<load≤150%±5% ＞ 30s transfer to bypass and warn
150%±5%<load<200%±5% ＞300ms transfer to bypass and warn |
||||||
| Efficiency | Line mode | Full load ≥88% | |||||
| Battery mode | Full load ≥85% | ||||||
| ECO | Full load ≥94% | ||||||
| Output voltage distortion | ≤3% (100% linear load) | ||||||
| ≤5% (100% non linear load) | |||||||
| Connection | 2x IEC
1x Schuko |
6x IEC
1x Schuko – 1x Terminal L/N + T |
|||||
| BATTERY | Input battery voltage | 24VDC | 48VDC | 72VDC | |||
| Internal battery capacity | 2 | 4 | 6 | ||||
| Internal battery type | 12V/7AH sealed lead acid maintenance free battery
(only refers to standard UPS) |
||||||
| Backup time | Full load ≥4min (only refers to standard UPS), as for long backup UPS, the backup time is determined by the capacity of battery. | ||||||
| Charging current (A) | 1 | ||||||
- Our products are manufactured according to the following EMC international grade standard and has passed the CE authentication:
| MSN01 – 02 – 03 |
| IEC/EN 62040-1 |
| IEC/EN 62040-2 |
| IEC/EN 62040-3 |
| IEC/EN 60950-1 |
| EN50171 |
- Work Environment
| MODEL | MSN01 – 02 – 03 |
| Temperature | 0°C～40°C |
| Relative humidity | 0～95% non condensing |
| Altitude | ＜1500m
If ＞1500m, a derating is required |
| Storage temperature | -25°C～55°C |
| Noise level | < 50dB @ 1m. |
- Mechanical Specification
| MODEL | DIMENSION WxDxH (mm) | GROSS / NET WEIGHT (Kg) |
| MSN01 | 144x368x215 | 10,5 / 9,7 |
| MSN02 | 191x469x339 | 21,6 / 20 |
| MSN03 | 26,2 / 24,6 |
- Items supplied with the product
| MODEL | MSN01 | MSN02 | MSN03 |
| Instruction manual | QR CODE | ||
| Software (CD-ROM) | Available for download | ||
| RS232 cable | 1 | ||
| USB cable | 1 | ||
| Input cable (IEC) | 1 | 1 | NO |
| Output cable (IEC) | 2 | 3 | 3 |
| TYPE | MSN06 | MSN10 | ||
| Rated power | 6kVA | 10kVA | ||
| Capacity | 5.4 KW | 9 KW | ||
| AC INPUT | Input | Single phase & Ground | ||
| Power factor | ≥ 0.8 (input THDV ≤1%) | |||
| Rated voltage | 220VAC / 230VAC / 240VAC | |||
| Rated frequency | 50Hz/60Hz Automatically selected | |||
| Voltage range | 120～276Vac | |||
| Frequency range | 45~66Hz | |||
| Bypass voltage range | 220Vac max：default +25% (+10% ,+15%，20% , 25%)
230Vac max：default +20% (+10% ,+15%，20% ) 240Vac max：default +15% (+10% ,+15%) |
|||
| min：default-45%(-20%, -30% , -45%, ) | ||||
| Bypass frequency range | ±1%、±2%、±4%、±5%、±10% | |||
| THDI | ≤3% (100% liner load，input THDV ≤1%) | |||
| ≤5% (100% non liner load，input THDV ≤1%) | ||||
| BATTERY | Battery number | 16 STANDARD 18/20 Pcs. Can be set | ||
| Battery type | 12V/7Ah | 12V/9Ah | ||
| VRLA | ||||
| Charge model | Boost charge or float charge auto switch | |||
| Charge time | Boost charge up to 20Hr (Max) | |||
| Charge current (Max) | 1A (Standard) | |||
| AC OUTPUT | Output type | Single phase & Ground | ||
| Voltage regulation | ±1.0% | |||
| Voltage distortion(THD) | less than 2% at 100% liner load | |||
| less than 5% at 100% non-liner load | ||||
| Rated voltage | 220V/230V/ 240Vac can be set | |||
| Frequency regulation | ±0.1% (stand alone) | |||
| ±0.25% (parallel operation) | ||||
| Frequency | Utility mode：tracking mains frequency | |||
| Battery mode：50Hz/60Hz | ||||
| Frequency track speed | 1Hz/s (stand alone) | |||
| 0.5Hz/s (parallel operation) | ||||
| Load capacity
(Mains, drop a level in battery mode) |
105 %～ 110 %，lasts 1 hour | |||
| 110%～125%,lasts 10 minutes | ||||
| 125%～150%, lasts 1 minute | ||||
| ＞150%，switch to bypass immediately | ||||
| Overload for bypass | ＞95%, can not inverter-fed | |||
| Load for a long time when rated output current under 125% | ||||
| Bypass load capacity is controlled by bypass circuit breaker, tripping when circuit breaker operating current. | ||||
| Crest factor | 3:1 | |||
| Efficiency | Line Mode | Full Load ≥90% | ||
| Battery Mode | Full Load ≥88% | |||
| ECO | Full Load ≥96% | |||
| Dynamic respond | ± 5.0% （100% balance load） | |||
| ≤5% in a cycle | ||||
| Inverter output current limit | When current instantaneous value is 2 ~ 3 times of rated current peaks (1.414 * rated power/(3 * 220)), the inverter will be conducted in each pulse current limit protection. | |||
| DC component | ≤200Mv | |||
| Switch time | Between Normal and battery mode | 0ms |
| Between inverter and bypass | 0ms | |
| Noise | <55dB (1m) | |
| Display | LED+LCD | |
| Safety | Meeting IEC62040-1， GB4943 | |
| EMI | Conduction ：IEC 62040-2 | |
| Radiation ：IEC 62040-2 | ||
| Harmonics ：IEC 62040-2 | ||
| EMS | IEC 62040-2 | |
| Isolation resistance | > 2MΩ（500Vdc） | |
| Isolation intension | 2820Vdc， <3.5mA，1min | |
| Surge | Meeting IEC60664-1 1.2/50uS+8/20uS 6kV/3kA. | |
| Protection |
IP20 |
|
◆ Work Environment
| TYPE | MSN06 | MSN10 |
| Temperature | 0°C～40°C | |
| Relative humidity | 0～95% non-condensing | |
| Altitude | ＜1500m when＞1500m, lower the rated power for use | |
| Handling |
On wheels |
|
◆ Mechanical Specification
| TYPE | MSN06 | MSN10 |
| Height (mm) | 616 | |
| Width (mm) | 250 | |
| Depth (mm) | 502 | |
| Net weight (Kg) (standard range) | 62 | 64 |
| Colour | Black | |
◆ Box content
| TYPE | MSN06 | MSN10 |
| User Manual | QR CODE | |
| Software (CD-ROM) | Available for download | |
| RS232 Cable | 1 | |
| USB Cable | 1 | |
| EPO Connector | 1 | |
| APPLIED STANDARDS |
| IEC/EN 62040-1 |
| IEC/EN 62040-2 |
| IEC/EN 62040-3 |
| IEC/EN 60950-1 |
| EN50171 |
Download the UPSilon2000 SOFTWARE here.
