SINGLE PHASE ISOLATION TRANSFORMERS
FOR MEDICAL EQUIPMENTS POWER SUPPLY
POWER
INPUT
OUTPUT
FREQUENCY
STANDARDS
FROM
300 TO 2000VA
230V
230V
50/60
Hz
EN
61558-2-6
EN60601-1
The TMIB isolation
transformers have been designed to obtain the highest isolation
from the electric network for the supply of medical devices,
WITH AN EARTHED SCREEN between primary and secondary winding.
They are fitted with a 10A green led 2 poles circuit breaker on
the front, while on the back side are placed all connectors,
input IEC with 2 fuses, 8 output IEC sockets to EN60320-2 rated
10A each, output fuse protection. A proper connection cable is
supplied. Metal case IP21, painted RAL7032 with lifting handle.
Higher ratings available on request.
installed in IP21 metal enclosure
ral7032 epoxy painted
lifting handles
2-poles illuminated 10A rocker switch on front (automtic
circuit breaker above 1.5kVA)
input plug to EN60320-1 with 2-poles input fuse
2
time delay fuses according to the rating
thermal resettable protection against short circuit, in
series with primary winding
isolation transformer with earthed copper screen
8
output sockets to EN60320-2 each max 10A (max current
limited to max power of the unit)
extra auxiliary equipotential earth male connector
Output fuse according to rating
Rating plate, operating manual, CE certificate
3000-4000VA models have terminal blocks on input and output
side, cables are to be provided at the place of the
installation accoriding to the requirements of the standards