Skip to content

VSA3 – THREE-PHASE ELECTROMECHANICAL VOLTAGE STABILIZERS FROM 10.5KVA TO 3000KVA

This product is currently out of stock and unavailable.

VSA3 – THREE-PHASE ELECTROMECHANICAL VOLTAGE STABILIZERS FROM 10.5KVA TO 3000KVA

Electromechanical voltage stabilizers use a variable toroidal transformer, a BUCK-BOOST transformer, and an electronic circuit that controls the rotation of the variable transformer, thus regulating the output voltage. With the control system, in a very fast response time, the high-torque regulation motor regulates small voltage changes very quickly. The servomotor is put out of service by the limit switches when it is outside its operating limits and by the control circuit when the output voltage is automatically adjusted to the set value. When the regulation is complete, the motor’s energy is cut with the help of an electronic opening circuit, operating in complete silence.

Regulation occurs independently on each phase. The system is equipped with a bypass switch that allows the load to be powered with mains voltage in the event of a malfunction or need. Using the setting buttons you can adjust the and high-low voltage limits. It is then possible to adjust the maximum current control and the relative hysteresis time. A display shows the input and output voltage, and the current delivered, on each phase

The new VSA3 stabilizers offer features such as:

  • Protection from voltages that are not adequate for the users.
  • Protection of user and device from excessive currents.
  • Pure sinus voltage regulation.
  • Long-term overload protection and instant protection.
  • AC voltage balancing with extreme precision.
  • It runs smoothly on all loads from 0% to 100%.
  • Manual change to bypass mode without adjustment.
  • Displays all values ​​in the bypass regime.
  • Records input voltage and load current limits.
  • Static, non-gradual, dynamically corrected output voltage.
  • When protections are activated, it records the number of protection trips and the reason for each trip.
  • Standard regulation is ±1% (396V -404V) stable when input voltage is within range

ATTENTION: THIS PRODUCT HAS NOT BEEN TESTED FOR OPERATION IN SYSTEMS WHERE THE PRESENCE OF PHOTOVOLTAIC SYSTEMS RESULTS IN CURRENT FLOWING FROM THE OUTPUT TO THE INPUT OF THE STABILIZER (BIDIRECTIONAL OPERATION).

ONLY THE RANGE OF ELECTRONIC PRODUCTS (IMP) IS TESTED FOR BIDIRECTIONAL OPERATION.

THREE PHASE ELECTROMECHANICAL VOLTAGE STABILIZERS – REGULATION PRINCIPLE

schema stabilizzatore di tensione trifase

CODE VSA3XXX 010 015 022 030 045 060 075 100 120 150
Power KVA 10.5 15 22.5 30 45 60 75 100 120 150
INPUT
Input voltage 400Vac 3ph + N
Voltage range -25%+15% (300Vac ~ 460Vac) [other ranges available on request, like 190-415 and 310-485]
Input frequency 47 : 64 Hz
OUTPUT
Output voltage 400Vac (adjustable 380:415V)
Output accuracy ± 1%
Output current A 15 21 32 43 65 86 108 144 173 217
Overload capacity 200% carico 10” / 150% carico per 2’
Output frequency 47 : 64 Hz (same as input frequency)
Regulation Speed 90V / sec
Efficiency min. 97%
Load max unbalance 100%
Display digital meter with output current/phase and line voltage reading, power

input digital v-meters

PROTECTIONS
Input protections Automatic circuit breaker
Output protections Short circuit, overload, low load, high-low voltage, high-low frequency, phase sequence failure by output contactor
By-Pass Manual By-pass included
MCB output Optional
MCB input Included
OTHER DATA
Cooling Forced cooling by thermostat
Protection class IP20 (higher protections available on request)
Max ambient temp. -10° C ~ +40° C
Altitude 1000 m
Relative humidity 95% (without condensation)
Acoustic pressure < 50dB
Colour RAL7035
Dimensions WxDxH cm 40x63x116 40x63x127 60x88x139 66x94x165 120x84x185
Weight kg. 115 125 140 165 228 285 345 410 450 575

 

CODE VSA3XXX 200 250 300 400 500 600 800 1000 1250 1600 2000 2500
Power KVA 200 250 300 400 500 600 800 1000 1250 1600 2000 2500
INPUT
Input voltage 400Vac 3ph + N
Voltage range -25%+15% (300Vac ~ 460Vac) [other ranges available on request, like 190-415 and 310-485]
Input frequency 47 : 64 Hz
OUTPUT
Output voltage 400Vac (adjustable 380:415V)
Output accuracy ± 1%
Output current A 289 362 434 578 724 869 1159 1449 1816 2318 2898 3623
Overload capacity 200% load 10”
Output frequency 47 : 64 Hz (as input frequency)
Regulation Speed 90V / sec
Efficiency min. 97%
Load max unbalance 100%
Display digital meter with output current/phase and line voltage reading, power

input digital v-meters

PROTECTIONS
Input protections Input circuit breaker, mains lamps, Emergency power off
Output protections Short circuit, overload, low load, high-low voltage, high-low frequency, phase sequence failure by output contactor
By-Pass Manual By-pass included by change-over switch
MCB output Optional
MCB input Optional
OTHER DATA
Cooling Forced cooling by thermostat
Protection class IP20 (higher protections available on request)
Max ambient temp. -10° C ~ +40° C
Altitude 1000 m
Relative humidity 95% (without condensation)
Acoustic pressure < 50dB
Colour RAL7035
Dimensioni LxPxH cm 120x84x185 175x84x185 180X124X175 180X124X210 210X214X185 T.B.A.
Peso kg. 585 610 1200 1350 1795 2700 1200 1350 1795 2700
WhatsApp
Invia con WhatsApp
GDPR Cookie Consent with Real Cookie Banner